Pontoons need careful transducer placement between the tubes.
Here is how the best units compare.
The Outdoor Recreation is reader-supported. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Quick Picks
- Best chartplotter combo: Garmin ECHOMAP UHD2 73sv
- Best small boat unit: Garmin STRIKER Vivid 4cv
- Best handheld: Hawkeye DT1H Handheld Depth Finder
- Best for FishReveal: Lowrance HOOK Reveal 5 SplitShot
- Best budget depth finder: Garmin Striker Plus 4
Comparison Table
| Product | Best for | Key spec | Standout feature | |
|---|---|---|---|---|
| Garmin ECHOMAP UHD2 73sv | Best chartplotter combo | 7 in touchscreen | Navionics+ charts | View |
| Garmin STRIKER Vivid 4cv | Best small boat unit | 4 in color screen | Vivid scanning sonar | View |
| Hawkeye DT1H Handheld Depth Finder | Best handheld | Handheld sounder | Point and read | View |
| Lowrance HOOK Reveal 5 SplitShot | Best for FishReveal | 5 in display | SplitShot transducer | View |
| Garmin Striker Plus 4 | Best budget depth finder | 4.3 in screen | Dual-beam CHIRP | View |
Detailed Reviews
1The ECHOMAP UHD2 73sv is a 7-inch touchscreen chartplotter and depth finder with ultra high-definition ClearVü and SideVü scanning sonar.
Garmin Navionics+ inland charts make it a full navigation and depth package for serious boaters.
Pros & Cons
What we like
- Touchscreen
- SideVü + ClearVü
- Navionics+ charts
Watch out for
- Higher cost
- Needs proper install
Key Specs
- Screen: 7 in touch
- Sonar: UHD ClearVü/SideVü
- Charts: Navionics+ US Inland
2The STRIKER Vivid 4cv is Garmin’s compact entry into color CHIRP sonar with ClearVü scanning, sized for small boats, jon boats and kayaks.
Its simple menus and built-in GPS for marking waypoints make it a favorite first depth finder.
Pros & Cons
What we like
- Easy to learn
- ClearVü scanning
- Waypoint GPS
Watch out for
- Small screen
- No preloaded maps
Key Specs
- Screen: 4 in color
- Sonar: CHIRP + ClearVü
- Transducer: GT20-TM included
3The Hawkeye DT1H is a handheld depth sounder you dip into the water to read depth and water temperature.
It is handy for checking depth from docks, kayaks, ice holes and small boats without installing anything.
Pros & Cons
What we like
- No install
- Reads depth and temperature
- Pocket size
Watch out for
- No fish display
- Must be held in water
Key Specs
- Type: handheld sounder
- Reads: depth, temperature
- Power: batteries
4The HOOK Reveal 5 SplitShot combines CHIRP and DownScan imaging with FishReveal, which highlights fish arches on the DownScan view.
It comes with C-MAP US Inland maps preloaded, making it a capable depth finder and map screen.
Pros & Cons
What we like
- FishReveal
- Preloaded C-MAP inland maps
- Auto-tuning sonar
Watch out for
- No SideScan on SplitShot
- Smaller screen
Key Specs
- Screen: 5 in
- Sonar: CHIRP + DownScan
- Maps: C-MAP US Inland
5The Striker Plus 4 is one of the simplest, most affordable depth finders from a major brand, with dual-beam CHIRP sonar and GPS waypoints.
It is a great choice for small boats, canoes and anglers who mainly want reliable depth readings.
Pros & Cons
What we like
- Very easy to use
- GPS waypoints
- Quickdraw contours
Watch out for
- Basic sonar views
- Small screen
Key Specs
- Screen: 4.3 in
- Sonar: dual-beam CHIRP
- GPS: built-in
How We Chose
We compared screen size, sonar type, GPS and charts, transducer options and power needs across dozens of depth finders and accessories, then read verified owner feedback on readability, installation and reliability. We did not receive free products, and we do not claim hands-on testing. TOR Scores combine published specs, verified owner feedback and overall value. We cover this in more depth in our roundup of the best depth finder.
Depth Finder Installation Basics
Most small-boat depth finders use a transom-mount transducer. Mount it where water flows smoothly, away from the propeller wash, strakes and rivets, with the face level with or slightly below the hull bottom. Run the cable to the console, secure it with clips, and connect power to a fused 12V source.
Kayaks and canoes often use scupper or arm mounts, while rental boats and jon boats can use a clamp-on portable bracket. Always follow the manufacturer’s instructions; a poorly placed transducer is the most common cause of bad readings at speed.
GPS, Maps and Navigation
A depth finder with GPS lets you save waypoints for productive spots, docks and hazards, and retrace your track back to the ramp. Chartplotter combos add lake or coastal maps with depth contours, and some units can build your own contour maps as you drive. You may also find our guide to the best depth finder and fish finder combos helpful.
For navigation, depth readings help you avoid shallow bars and rocks, but they are not a substitute for charts, local knowledge and careful boat handling. Always keep a lookout and slow down in unfamiliar water.
How to Choose a Depth Finder
- Screen size: 4 to 5 inches suits kayaks and small boats; 7 to 9 inches is easier to read on larger boats.
- Sonar type: traditional CHIRP for depth and fish arches, down imaging for detail under the boat, side imaging for scanning wide areas.
- GPS and maps: built-in GPS marks waypoints; chartplotter combos add lake or coastal charts.
- Transducer mount: transom, trolling motor, through-hull or portable clamp.
- Power: most units run on 12V; kayaks and portable kits need a small battery.
Match the unit to your boat and water first, then add features you will actually use.
Depth Finder vs Fish Finder
A depth finder, or depth sounder, uses sonar to measure how deep the water is under your boat. A fish finder uses the same sonar but also shows fish arches, bait, structure and bottom hardness on a screen. Today almost every fish finder doubles as a depth finder, so most boaters buy one unit that does both.
Basic depth sounders and handheld units are cheapest and simplest. Fish finders with CHIRP, down imaging or side imaging cost more but show far more detail, and chartplotter combos add GPS maps for navigation. Related: our shortlist of the best depth finder camera options.
Reading Depth and Bottom on the Screen
The depth number in the corner is the most important reading. The bottom shows as a thick band: a hard bottom such as rock returns a brighter, thicker line, while mud and weeds return a softer, thinner line. Fish usually appear as arches when the boat is moving and lines when you sit still.
Turn sensitivity up until you see a little clutter, then back it off. Use zoom and split views to focus on the bottom few feet where many fish feed.
Power, Batteries and Wiring
Boat-mounted depth finders usually run from the boat’s 12V battery through an inline fuse. Kayaks and portable kits use a small sealed lead-acid or lithium battery; a 12V lithium iron phosphate battery saves weight and lasts longer between charges. If you are comparing options, our guide to the best electric depth finder setups is worth a look.
Use marine-grade wire and connectors, keep connections dry, and charge batteries with a charger that matches the battery chemistry.
Caring for Your Depth Finder
Rinse the transducer and mount after saltwater use, keep the transducer face clean of growth and paint, and store the display under a sun cover or remove it when the boat is parked. UV and heat are hard on screens over time.
Check cable runs for chafing each season and keep software up to date so maps and sonar features work properly.
Related guides: best depth finder for pontoon boat, best depth finder for boat, best depth finder and gps for boats. See every pick in our Fish Finders category.
Sources and further reading: NOAA Fisheries: recreational fishing resources and Leave No Trace: the 7 Principles. Product specs come from brand listings on Amazon. Always check local fishing regulations before you fish.
Frequently Asked Questions
What is the difference between a depth finder and a fish finder?
A depth finder measures water depth; a fish finder also shows fish, structure and bottom detail. Most fish finders work as depth finders.
Do I need GPS on a depth finder?
Not for depth alone, but GPS lets you mark spots and navigate back to them.
Can I install a depth finder myself?
Many small-boat units are DIY friendly; follow the transducer placement guidance carefully.
Will a depth finder work in shallow water?
Yes, though readings can be less stable in very shallow, weedy water.
How do I power a depth finder on a kayak?
Use a small 12V battery, often lithium, stored in the hull or a crate.
Final Verdict
For most readers, the Garmin ECHOMAP UHD2 73sv is our top pick for depth finder for pontoons. The other picks cover different budgets and needs.






Write Your Review
No reviews yet. Be the first to share your experience!