PWC setups must be compact and secure.
Here is how the best setups compare. Follow your PWC maker’s guidance.
The Outdoor Recreation is reader-supported. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.

Quick Picks
- Best portable: Garmin Striker 4 with Portable Kit
- Best small boat unit: Garmin STRIKER Vivid 4cv
- Best display mount: Aluminum Ball Mount for Garmin Striker 4
- Best budget depth finder: Garmin Striker Plus 4
- Best battery: 12V 15Ah LiFePO4 Deep Cycle Battery
Comparison Table
| Product | Best for | Key spec | Standout feature | |
|---|---|---|---|---|
| Garmin Striker 4 with Portable Kit | Best portable | 3.5 in screen + GPS | CHIRP sonar | View |
| Garmin STRIKER Vivid 4cv | Best small boat unit | 4 in color screen | Vivid scanning sonar | View |
| Aluminum Ball Mount for Garmin Striker 4 | Best display mount | 1 in ball mount | Adjustable angle | View |
| Garmin Striker Plus 4 | Best budget depth finder | 4.3 in screen | Dual-beam CHIRP | View |
| 12V 15Ah LiFePO4 Deep Cycle Battery | Best battery | 12V 15Ah | Up to 8000+ cycles | View |
Detailed Reviews
1The Garmin Striker 4 with Portable Kit packs a CHIRP sonar fish finder, GPS waypoint map, battery and carrying case for ice fishing or moving between boats.
It is a dedicated-screen alternative to castable sonar, with simple buttons and a waypoint map to mark brush piles, stumps and docks.
Pros & Cons
What we like
- CHIRP sonar
- GPS waypoints
- Portable kit included
Watch out for
- Transducer is not castable
- Small screen
Key Specs
- Screen: 3.5 in
- Sonar: CHIRP
- Extras: GPS, portable case and battery
2The STRIKER Vivid 4cv is Garmin’s compact entry into color CHIRP sonar with ClearVü scanning, sized for small boats, jon boats and kayaks.
Its simple menus and built-in GPS for marking waypoints make it a favorite first depth finder.
Pros & Cons
What we like
- Easy to learn
- ClearVü scanning
- Waypoint GPS
Watch out for
- Small screen
- No preloaded maps
Key Specs
- Screen: 4 in color
- Sonar: CHIRP + ClearVü
- Transducer: GT20-TM included
3. Aluminum Ball Mount for Garmin Striker 4
3This aluminum ball mount lets you tilt and swivel a Striker-size display for the best viewing angle.
It works with common 1-inch ball arm systems used on kayaks and small boats.
Pros & Cons
What we like
- Adjustable
- Solid aluminum
- Compatible with 1 in ball arms
Watch out for
- Arm sold separately in some setups
- Check fit
Key Specs
- Type: ball mount
- Ball: 1 in
- Fit: Striker 4 size units
4The Striker Plus 4 is one of the simplest, most affordable depth finders from a major brand, with dual-beam CHIRP sonar and GPS waypoints.
It is a great choice for small boats, canoes and anglers who mainly want reliable depth readings.
Pros & Cons
What we like
- Very easy to use
- GPS waypoints
- Quickdraw contours
Watch out for
- Basic sonar views
- Small screen
Key Specs
- Screen: 4.3 in
- Sonar: dual-beam CHIRP
- GPS: built-in
5This 12V 15Ah LiFePO4 battery is light and long-lasting, a good fit for kayak and small boat fish finders.
Lithium iron phosphate batteries hold voltage well and last far more cycles than lead-acid batteries.
Pros & Cons
What we like
- Light
- Long cycle life
- Steady voltage
Watch out for
- Needs a lithium-compatible charger
- Costs more than SLA
Key Specs
- Type: LiFePO4
- Capacity: 15Ah
- Voltage: 12V
How We Chose
We compared screen size, sonar type, GPS and charts, transducer options and power needs across dozens of depth finders and accessories, then read verified owner feedback on readability, installation and reliability. We did not receive free products, and we do not claim hands-on testing. TOR Scores combine published specs, verified owner feedback and overall value. If you are comparing options, our guide to the best depth finder is worth a look.
Depth Finder Installation Basics
Most small-boat depth finders use a transom-mount transducer. Mount it where water flows smoothly, away from the propeller wash, strakes and rivets, with the face level with or slightly below the hull bottom. Run the cable to the console, secure it with clips, and connect power to a fused 12V source.
Kayaks and canoes often use scupper or arm mounts, while rental boats and jon boats can use a clamp-on portable bracket. Always follow the manufacturer’s instructions; a poorly placed transducer is the most common cause of bad readings at speed.
Power, Batteries and Wiring
Boat-mounted depth finders usually run from the boat’s 12V battery through an inline fuse. Kayaks and portable kits use a small sealed lead-acid or lithium battery; a 12V lithium iron phosphate battery saves weight and lasts longer between charges. For a closer look, see our guide to the best depth finder and fish finder combos.
Use marine-grade wire and connectors, keep connections dry, and charge batteries with a charger that matches the battery chemistry.
Boating Safety Comes First
A depth finder helps you avoid shallow water, but safe boating still depends on life jackets, weather awareness and good navigation. Wear a properly fitted life jacket, tell someone your plan and check the forecast before you go. Taking a boating safety course is a smart first step.
Depth Finder vs Fish Finder
A depth finder, or depth sounder, uses sonar to measure how deep the water is under your boat. A fish finder uses the same sonar but also shows fish arches, bait, structure and bottom hardness on a screen. Today almost every fish finder doubles as a depth finder, so most boaters buy one unit that does both. We cover this in more depth in our roundup of the best depth finder camera options.
Basic depth sounders and handheld units are cheapest and simplest. Fish finders with CHIRP, down imaging or side imaging cost more but show far more detail, and chartplotter combos add GPS maps for navigation.
How to Choose a Depth Finder
- Screen size: 4 to 5 inches suits kayaks and small boats; 7 to 9 inches is easier to read on larger boats.
- Sonar type: traditional CHIRP for depth and fish arches, down imaging for detail under the boat, side imaging for scanning wide areas.
- GPS and maps: built-in GPS marks waypoints; chartplotter combos add lake or coastal charts.
- Transducer mount: transom, trolling motor, through-hull or portable clamp.
- Power: most units run on 12V; kayaks and portable kits need a small battery.
Match the unit to your boat and water first, then add features you will actually use.
Reading Depth and Bottom on the Screen
The depth number in the corner is the most important reading. The bottom shows as a thick band: a hard bottom such as rock returns a brighter, thicker line, while mud and weeds return a softer, thinner line. Fish usually appear as arches when the boat is moving and lines when you sit still. You may also find our guide to the best electric depth finder setups helpful.
Turn sensitivity up until you see a little clutter, then back it off. Use zoom and split views to focus on the bottom few feet where many fish feed.
GPS, Maps and Navigation
A depth finder with GPS lets you save waypoints for productive spots, docks and hazards, and retrace your track back to the ramp. Chartplotter combos add lake or coastal maps with depth contours, and some units can build your own contour maps as you drive.
For navigation, depth readings help you avoid shallow bars and rocks, but they are not a substitute for charts, local knowledge and careful boat handling. Always keep a lookout and slow down in unfamiliar water.
Related guides: best depth finder for jet ski, best depth finder for kayak, best depth finder bracket. See every pick in our Fish Finders category.
Sources and further reading: NOAA Fisheries: recreational fishing resources and Leave No Trace: the 7 Principles. Product specs come from brand listings on Amazon. Always check local fishing regulations before you fish.
Frequently Asked Questions
What is the difference between a depth finder and a fish finder?
A depth finder measures water depth; a fish finder also shows fish, structure and bottom detail. Most fish finders work as depth finders.
Do I need GPS on a depth finder?
Not for depth alone, but GPS lets you mark spots and navigate back to them.
Can I install a depth finder myself?
Many small-boat units are DIY friendly; follow the transducer placement guidance carefully.
Will a depth finder work in shallow water?
Yes, though readings can be less stable in very shallow, weedy water.
How do I power a depth finder on a kayak?
Use a small 12V battery, often lithium, stored in the hull or a crate.
Final Verdict
A Striker 4 portable kit is the simplest PWC setup.






Write Your Review
No reviews yet. Be the first to share your experience!